|
|
New Productive Tool Holders From Iscar Direct The Way In Machining Capacity
Iscar's Heliturn model features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The cutting edge Heliturn is a tangentially clamped insert using a distinctive helical shaped cutting edge, useful for large depths of cut and greater than average feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and held by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to ensure perfect contact of the insert with the tool holders. The upper rake face of this insert is mounted level with the top of the tool holder to permit chips to flow across the insert, without being interfered by clamps or the tool holder body. The 4 curved helical cutting edges establish positive radial rake angles and soft penetration into the material being cut. The lower forces and smaller loads provide better tool lifetime, elevated stability and the ability to use very massive depths of cut and greater feeds. The chipformer, manipulates and breaks the chip into rib type curved pieces which can quickly be removed from the cutting area. The insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to grant machining to a 90 shoulder. Depths of cut up to .315" and facing depths to .126" at up to .047" IPR are attainable with Heliturn.
When compared to CNMG/M 16... or WNMG/M 13... insert sizes with the similar corner radius, much enhanced tool life can be foreseeable when using the LNMX 1506..-HT insert. Iscar has recently included a smaller size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the medium application range of up to .197" depth of cut. The unique insert features all of the benefits of the larger insert. This enhances the economical advantage in the medium machining application area. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a far better tool life can be foreseen. The inserts are accessible in .031, .047 and .063" tool nose radii. Heliturn inserts are presented in the most advanced carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.
The external tool holders are attainable in 1, 1.25 and 1.5" shank sizes. Boring bars are obtainable in 1, 1.25 1.5 and 2" bar sizes. Also obtainable are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which extends holder life and hinders corrosion. As a result of the placement of this insert, machining next to the tailstock is probable.
The high positive rake angle of these tools allows 10-15% less power usage than conventional tool holders at the same parameters.
By utilizing Iscar's Heliturn tools, massive cost savings and profitability in lathe procedures is guaranteed.
A Brand new 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is unveiling the CNMX 1207..-HTW insert family. The unique insert has a very positive radial, helical cutting edge and a positive rake angle; a succession which substantially reduces the cutting forces. The insert's corner has a wiper arrangement which provides high surface finish even at high feed conditions, which in abundant occasions can eliminate a finishing cut. The corner angle is 88 degrees which provides elevated strength. The CNMX inserts were created for heavy machining applications. Their specific design ensures dependable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any standard tool holder that carries standard CNMG inserts, but the seat has to be substituted with a special seat: TCH 4. Iscar's R-clamp tool holders are highly endorsed for heavy machining applications.
Saving You Hardware Headaches And Lots Of Cash: Purchasing The Perfect Cordless Drill
Whether you're an avid craftsman or an amateur just looking to fix things around the house, to buy a cordless drill can be a daunting task.
Buying A Megger Tester: Best Tactics
A Megger tester is a device that is commonly used in electrical contracting to determine if the system has been properly installed.
A Wood Chipper Can Make It A Lot Easier To Clean Away Brush In Your Yard
A wood chipper can be a great tool to help clean up your yard and for making chips for landscaping. Here are a few things you need to know about when picking one.
Woodworking Made Easier With Grizzly Equipments
Woodworking is a craft that requires adequate skill and creativity. The skill of a woodworker is translated to the wood with the use of appropriate wood carving tools. One brand that is popular among Northern Tools customers is Grizzly Woodworking tools.
Kreg Jig Undertakings - Why You Should Purchase A Pocket Hole Jig
If you love working with wood, then you have probably created your fair share of cabinets, cupboards, and other similar kinds of projects. Not only is it very enjoyable, it is also very therapeutic.
|
More Articles
Blogroll
|
